GE Tetra PowerGrid-Gen 3 User Manual

Product Codes
93013528, 93013522, 93013523, 93013524
Installation GuideGE
Lighting
Tetra
®
PowerGrid - Gen 3
LED ARCHITECTURAL SERIES
LED System Features
• Certied to UL 2108
• Low-Voltage Luminaire (24 VDC)
• IP54, dry or damp location rated.
• Compatible with 24 Volt GE LED Drivers
• Dimmable with GE 0-10V Dimming LED Driver or GE
Dimming Module and compatible dimming controller
Save These Instructions
This product is intended solely for the use of non-
residential architecture lighting and is not intended for
use in any other applications.
BEFORE YOU BEGIN
Read these instructions completely and carefully
Prepare Electrical Wiring
Electrical Requirements
• Do not use in wet locations.
• The grounding and bonding of the LED Driver shall be
done in accordance with National Electric Code (NEC)
Article 600.
• Follow all National Electric Codes (NEC) and local codes.
For use in the following applications
• Backlighting
• Illuminated Walls or Ceilings
imagination at work
WARNING/AVERTISSEMENT
Risk of electrical shock. Disconnect power before servicing or
installing product.
Risque de choc électrique. Couper l’alimentation avant le
dépannage ou avant l’installation du produit.

GE Tetra PowerGrid-Gen 3 Specifications

General

Brand	GE
Model	Tetra PowerGrid-Gen 3
Category	Lighting Equipment
Language	English