GE VersaMax IC200MDL240 - Page 262

GFK-1504N Chapter 9 Discrete Mixed Modules 9-3
9
IC200MDD840
Mixed Module, 24 V DC Positive Logic Input 20 Points /
Output Relay 2.0 A 12 Points
Module Specifications
Module Characteristics
Points
20 positive DC inputs, two groups of 10
12 Form A relay outputs, two groups of 6
Module ID
80358035
Isolation:
User input/output to logic
(optical) and frame ground
Group to group
Point to point
250 V AC continuous; 1500 V AC for 1 minute
250 V AC continuous; 1500 V AC for 1 minute
None
LED indicators
One LED per point shows individual point on/off state
OK LED indicates backplane power is present
Backplane current consumption
5V output: 375mA maximum
External power supply 0 to 125 V DC, 5/24/125 V DC nominal
0 to 265 V AC (47 to 63Hz), 120/240 V AC nominal
Thermal derating
None
Configuration parameters
Input response time
Compatibility
PME programmer
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW,FW vers.
FW release
All
AA
1.0
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
Input Characteristics
Input voltage
0 to +30 V DC, +24 V DC nominal
On state voltage
Off state voltage
+15 to +30 V DC
0 to +5 V DC
On state current
Off state current
2.0 to 5.5mA
0 to 0.5mA
On, Off response time
0.5ms maximum
Configurable filter time
0ms, 1.0ms (default), or 7.0ms
Input impedance
10 kΩ, maximum
Output Characteristics
Output voltage 0 to 125 V DC, 5/24/125 V DC nominal
0 or 265 V AC (47 to 63Hz), 120/240 V AC nominal
Output voltage drop
0.3V maximum
Load current
10mA per point minimum
2.0A for 5 to 265 V AC max. (resistive), 8.0A max. per group
2.0A for 5 to 30 V DC max. (resistive), 8.0A max. per group
0.2 A for 31 to 125 V DC maximum (resistive)
Output leakage current
Not applicable (open contact)
On , Off response time
10ms maximum
Protection
No internal fuses or snubbers
Switching frequency
20 cycles per minute (inductive load)
Relay type
Fixed coil, moving armature
Contact type
Silver alloy
Contact life
Refer to appendix B