GE VersaMax IC200MDL240 - Page 267

9-8 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
9
IC200MDD842
Mixed Module, Output 24 V DC Pos. Logic 0.5A Grouped w/ESCP 16 Points
/ Input 24 V DC Pos/Neg Logic Grouped 16 Points
Module Specifications
Module Characteristics
Points
1 group of 16 outputs
2 groups of 8 inputs
Module ID
80088080
Isolation:
User input to logic (optical)
and to frame ground
Group to group
Point to point
250 V AC continuous; 1500 V AC for 1 minute
250 V AC continuous; 1500 V AC for 1 minute
None
LED indicators
One green LED per point shows individual point on/off state.
One amber LED per point shows individual point overloads
for outputs.
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
Backplane current consumption
5V output: 100mA maximum
External power supply
+18 to +30 V DC, +24 V DC nominal
Thermal derating
Refer to diagram
Configuration parameters
Input response time
Compatibility
PME software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW,FW vers.
FW release
All
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
AA
1.0
Input Characteristics
Input voltage
0 to +30 V DC, +24 V DC nominal
On state voltage
Off state voltage
+15 to +30 V DC
0 to +5 V DC
On state current
Off state current
2.0 to 5.5mA
0 to 0.5mA
On response time
Off response time
0.5ms maximum
Additional configurable filter
time
0 ms, 1.0ms (default), or 7.0ms
Input impedance
10kΩ maximum
Output Characteristics
Output voltage
+18 to +30 V DC, +24 V DC nominal
Output voltage drop
0.5V maximum
Steady-state overcurrent trip
point
1.6A typical, 0.7A to 2.5A maximum range
Load current
0.5 A at 30 V DC maximum (resistive)
2.0 A maximum for 100ms inrush
Output leakage current
0.5mA at 30 V DC maximum
On response time
Off response time
0.5ms maximum
0.5ms maximum
Protection (each output) Short circuit protection, overcurrent protection, free-wheeling
diodes