GE VersaMax IC200MDL240 - Page 290

GFK-1504N Chapter 9 Discrete Mixed Modules 9-31
9
IC200MDD846
Mixed Module, Output Relay 2.0 A per Pt Isolated 8 Points /
Input 120 V AC Grouped 8 Points
Module Specifications
Module Characteristics
Points
8 Positive AC Inputs, one group.
8 Individually-isolated Form A Relay Outputs.
Module ID
88048040
Isolation:
User input/output to logic
(optical) and frame ground
Group to group
Point to point
250 V AC continuous; 1500 V AC for 1 minute
250 V AC continuous; 1500 V AC for 1 minute
Outputs: 250 V AC continuous; 1500 V AC for 1 minute
Inputs: none
LED indicators
One LED per point shows individual point on/off state
OK LED indicates backplane power is present
Backplane current consumption
5V output: 300mA maximum Refer to graph
Thermal derating
None
Compatibility
PME programming software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW,FW vers.
FW release
All
AA
1.0
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
Input Characteristics
Input voltage
0 to 132 V AC (47 to 63Hz), 120 V AC nominal
On state voltage
70 to 132 V AC
Off state voltage
0 to 20 V AC
On state current
Off state current
5mA minimum
2.5mA maximum
On response time
Off response time
1 cycle maximum
2 cycles maximum
Input impedance 8.6kΩ (reactive) at 60Hz, typical
10.32kΩ (reactive) at 50Hz, typical
Output Characteristics
Output voltage 0 to 125 V DC, 5/24/125 V DC nominal
0 to 265 V AC (47 to 63Hz), 120/240 V AC nominal
Output voltage drop
0.3V maximum
Load current 10mA per point minimum
2.0 Amps for 5 to 265 V AC maximum (resistive)
2.0 Amps for 5 to 30 V DC maximum (resistive)
0.2 Amp for 31 to 125 V DC maximum (resistive)
Output leakage current
Not applicable (open contact)
On response time
Off response time
10ms maximum
10ms maximum
Protection
No internal fuses or snubbers.
Switching frequency
20 cycles per minute (inductive load)
Relay type
Fixed coil, moving armature
Contact type
Silver alloy
Contact life
Refer to appendix B