GE VersaMax IC200MDL240 - Page 419

GFK-1504N Chapter 12 Analog Mixed I/O Modules 12-3
12
IC200ALG430
Analog Mixed Module, 12 Bit Input Current 4 Channels and
Output Current 2 Channels
Module Specifications
Module Characteristics
Channels
4 differential inputs, one group, 2 single-ended outputs, one group
Module ID
FFFF9424
Isolation:
User input to logic (optical) and to
frame ground
Group to group
Channel to channel
250VAC continuous; 1500VAC for 1 minute
Not applicable
None
LED indicators
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
Backplane current consumption
5V output: 50mA maximum
Thermal derating
None
Configuration parameters
Output default
Diagnostics
Loss of User Side Power
Compatibility
PME programming
software
CPU001 CPU002 CPU005 CPUE05 DBI001 EBI001 GBI001 PBI001
HW, FW vers. FW release
All
AA
1.0
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
External Power Supply
Recommended Range
+18 to +30 V DC (including ripple)
Current consumption at recommended range
160mA max.(including load current)
12V operation range
9.6 to 15 V DC , 12 V DC nominal (including ripple)
Current consumption at 12V range
215mA max.(including load current)
Input Characteristics
Input current
4 to 20mA
Input Impedance
200 Ω maximum
Accuracy (0V Common Mode Voltage):
25 °C**
0 to 60 °C
± 0.3% typ. of full scale, ± 0.5% max. of full scale
± 1% maximum of full scale
Resolution:
4µA = 8 counts
Filter response
5.0ms
Update rate per module
0.4ms
Common mode voltage
<30V
Channel-to-channel crosstalk rejection
30dB minimum
Output Characteristics
Output current
4 to 20mA
Load characteristics:
Resistive
Capacitive
Inductive
0 to 1250 Ω maximum ( R
L(MAX)
= (V
EXTERNAL PS
- 4V) / 20.38mA)
0.1µF maximum
0.5H maximum
Accuracy at 25 °C**
Accuracy at 0 to 60 °C
± 0.3% typ. of full scale, ± 0.5% max of full scale
± 1% maximum of full scale
Resolution
4µA = 8 counts
Update rate per module
0.3ms maximum
Channel-to-channel crosstalk rejection
70dB minimum
Output default
Hold Last State (default), 4mA (configurable)
** In the presence of severe RF interference, (IEC1999-4-3, 10V/m), accuracy degraded to ± 1% maximum of full
scale. Input accuracy may be degraded an additional ± 0.75% with the introduction of input common mode voltage.