GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
Chapter 4 - Functional Checks 4-37
4-5-4 Load Full Backup (Presets, Configurations & Application Settings) (cont’d)
8.) Click the NEXT
button and then select YES to start, or NO to cancel the restore procedure.
After restoring the data, the Voluson® 730Expert reboots and the application starts again.
4-5-5 Delete Full Backup (Presets, Configurations & Application Settings)
1.) On the Touch Panel, touch UTILITIES.
2.) In the Utilities menu, touch SYSTEM SETUP
to invoke the setup desktop on the screen.
3.) Select the
BACKUP page and click the DELETE button of the “Full Backup” group.
4.) Choose the Destination (e.g., HDD = Hard disk).
5.) Click on the backup to be deleted (additional information is displayed in the table).
6.) Select the DELETE
button.
Figure 4-33 Start Restore Backup now?
WARNINGWARNING
!! WARNING:
When clicking “YES”, the current data on the system will be permanently replaced by
the data of the backup and can not be restored!
Figure 4-34 Full Backup Delete
WARNINGWARNING
!! WARNING:
There is no “ UNDO” function for this action!
choose destination
select backup
select [Delete]
To Next Page
Loading...
