GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
4-36 Section 4-5 - Backup and Restore Database, Preset Configurations and Images
4-5-4 Load Full Backup (Presets, Configurations & Application Settings) (cont’d)
1.) On the Touch Panel, touch UTILITIES
.
2.) In the Utilities menu, touch SYSTEM SETUP
to invoke the setup desktop on the screen.
3.) Select the
BACKUP page and click the LOAD button of the “Full Backup” group.
4.) Choose the Destination (e.g., Network Drive).
5.) Click on the backup to be restored (additional information is displayed in the table).
6.) Select the NEXT
button. The following window will be displayed.
7.) Select the data to be restored to the Voluson® 730Expert system.
NOTE: For description of the check box names review: A full backup always contains the following data
Figure 4-31 Full Backup Load
Figure 4-32 Select Data to be restored
choose destination
select backup
click [Next]
click [Next]
To Next Page
Loading...
