EasyManua.ls Logo

GE Voluson 730Expert - Page 229

GE Voluson 730Expert
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-19
7-7-8 DVD/CD+(R)W Troubleshooting (DVD/CD Drive)
1.) Insert an empty DVD/CD+(R)W into the Drive.
2.) Enter “Sonoview” by pressing the SONOVIEW
key on the control panel; see Figure 7-19.
3.) Click the “Open” icon to display the list of exams.
4.) Select exam(s) and backup them to DVD/CD+(R)W.
5.) Choose “DVD/CD” Drive.
6.) The images, which you have choosen during backup should be visible.
7-7-9 MOD Troubleshooting
1.) Insert an empty MO into the Drive.
2.) Enter “Sonoview” by pressing the SONOVIEW
key on the control panel; see Figure 7-19.
3.) Click the “Open” icon to display the list of exams.
4.) Select exam(s) and backup them to MO.
5.) Choose “MO” Drive.
6.) The images, which you have chosen during backup should be visible.
Figure 7-19 To backup exams to DVD/CD+(R)W resp. MO-Disk
NOTICE
!! NOTICE:
In case of any problems, check status of the Diagnostic LED´s and voltages of the AUX Supply
connector (= Disk Drive Module power connector) on the backpanel of the GEF-Box;
see: Section 7-3 "Check Points Voltages" on page 7-4
NOTICE
!! NOTICE:
In case of any problems, check status of the Diagnostic LED´s and voltages of the AUX Supply
connector (= Disk Drive Module power connector) on the backpanel of the GEF-Box;
see: Section 7-3 "Check Points Voltages" on page 7-4
1. Press Sonoview key 2. Click “Open” icon
and backup exams
3. After Backup,
choose DVD/CD
(resp. MO)

Related product manuals