GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
Chapter 3 - Setup Instructions 3-1
Chapter 3
Setup Instructions
Section 3-1
Overview
3-1-1 The Purpose of Chapter 3
This chapter contains information needed to setup the Voluson® 730Expert unit. Included are
procedures to receive, unpack and configure the equipment. A worksheet is provided (see: page 3-50)
to help ensure that all the required information is available, prior to setup the system.
Section 3-2
Set Up Reminders
3-2-1 Average Installation Time
Table 3-1 Contents in Chapter 3
Section Description Page Number
3-1
Overview
3-1
3-2
Set Up Reminders
3-1
3-3
Receiving and Unpacking the Equipment
3-4
3-4
Preparing for Set Up
3-6
3-5
Connection of Auxiliary Devices
3-8
3-6
Completing the Set Up
3-22
3-7
Printer Installation
3-26
3-8
System Configuration
3-41
3-9
Available Probes
3-47
3-10
Software/Option Configuration
3-47
3-12
Connectivity Setup Worksheet
3-50
3-11
Network IP Address Configuration
3-48
3-13
Paperwork
3-51
Table 3-2 Average Installation Time
Description Average Installation Time Comments
Unpacking the scanner 0.5 hours
Scanner /options / printers 0.5 to 1.5 hours Dependant on the required configuration
DICOM Option 0.5 - 1.5 hours Dependant on the configuration amount
To Next Page
Loading...
