GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
3-28 Section 3-7 - Printer Installation
3-7-1-1 Install the HP printer software/driver (cont’d)
2.) Click the NEXT
buttons to start the Hardware Wizard and to locate the driver files.
3.) Use the BROWSE
button to search the following path on the hard disk (see: Figure 3-27)
- C:\Utilities\PrinterDriver\HPDeskjet990c for HP 990cxi
- C:\Utilities\PrinterDriver\HPDeskjet995c for HP 995c, and then click OK
.
4.) Confirm the correct path and click NEXT
to install the driver. All necessary files are copied.
5.) Confirm the installation by clicking FINISH
to close the Hardware Wizard.
6.) Close all open windows and restart the system (turn off and on the system).
Figure 3-27 Search for Network path on hard disk
Figure 3-28 Confirm correct path and finish the Installation
NOTICE
!! NOTICE:Ver
After boot up of the system, verify the correct settings in the printer “Properties”, see: Section 3-7-4
"Adjustment of Printer Settings" on page 3-36.
To Next Page
Loading...
