GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
Chapter 3 - Setup Instructions 3-41
Section 3-8
System Configuration
3-8-1 System Setup
Modifications of system parameters are supported by diverse dialog pages and windows on the system
setup desktop:
• General - Date, Time, Clinic Name, Language, Screen saver, etc.
• User Settings - to save User programs, 3D/4D programs, Auto Text, Doppler 2D Refresh, etc.
• Peripherals - to adjust assignment of PRINT
keys, Foot Switch, selection of Save Destination, etc.
•Option - shows which options are installed in the system
• Service - enter the password to get access to the Service Tools functions
• Backup - Save/Load User Settings Only, Save/Load/Delete Full Backup
•Network - to set up all DICOM, Sonoview and Network configuration nodes
• System Info - shows which Software/Hardware version is installed in the system
3-8-1-1 To invoke the Setup procedure:
1.) Touch the UTILITIES
key on the Touch Panel.
2.) Touch the SYSTEM SETUP
key in the “Utilities” menu to activate the setup desktop screen.
In general operations are done with the trackball and the trackball keys (mouse emulation).
NOTICE
!! NOTICE:
More detailed information pertaining System Setup adjustments is found in the Voluson® 730Expert
Basic User Manual; see: Table 9-17, “System Manuals,” on page 9-29.
Trackball (mouse position):
positions the pointing device (arrow) on the desktop
left trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
upper trackball key (right mouse button):
no function in system desktop
right trackball key (left mouse button):
sets, fixates markers and activates pages/buttons etc. marked by the pointing device
To Next Page
Loading...
