GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
3-40 Section 3-7 - Printer Installation
3-7-5 Remote Control Selection
To assign an auxiliary device (e.g., printer) to the remote keys PRINT A and/or PRINT B, or to adjust
Foot switch, etc.:
1.) On the Touch Panel, touch UTILITIES
.
2.) In the Utilities menu, touch SYSTEM SETUP
to invoke the setup desktop on the screen.
3.) Select the
PERIPHERALS page.
• Remote Print A: Select the desired Printer for the remote control PRINT A
key.
• Remote Print B: Select the desired Printer for the remote control PRINT B
key.
NOTE: Optionally the Remote Control can be done by Foot switches.
Therefore select “Print A” or “Print B” in “Foot Switch Left” or “Foot Switch Right” - section.
• Report Printer: Select the desired Report Printer from the drop-down menu.
• Foot Switch Left/Right: Select desired function of the Foot switch Left and Right.
After adjustment, click SAVE&EXIT
to save Settings and exit System Setup.
Figure 3-47 Peripherals page
NOTICE
!! NOTICE:
The selected Report Printer is usually used for printing reports and images from Sonoview.
Foot Switch
Remote
Control
Report Printer
Print B
Print A
VCR Source
To Next Page
Loading...
