21
Taking Panoramic Pictures
Use panorama to "stitch" up to 3 pictures into 1 panoramic
scene.
NOTE: Individual pictures are not saved, even if panorama
capture is cancelled before stitching occurs. (Focus and expo-
sure are set with the rst picture. The ash is set to O.)
1. Turn the Mode Dial to Panorama
.
The default direction for taking panoramic pictures is left
to right . To take pictures from right to left, press
the Disp button. Select the Panorama tool and press OK.
Choose , then press OK.
2. Take the rst picture.
After a quickview, the LCD displays the Liveview and an
"overlay" from the rst picture.
3. Compose the second picture. Make the overlay from the
rst picture cover the same portion in the new picture.
If you are taking/stitching only 2 pictures, press OK to
choose Stitch. After you take 3 pictures, the pictures are
automatically stitched.
Take 2 or 3 pictures.
Get 1 panoramic picture.
To Next Page
Loading...
