GEA GSC TP - Sequence Control Operation Examples; Diagram Interpretation for Sequence Examples

2 EXAMPLES FOR THE SEQUENCE CONTROL OF PACKAGES
This chapter shows 4 possble and typical situations of compressor operation with sequence control. Other situa-
tions may occur depending on the system configuration and load fluctuations.
Important information about the diagrams
fig.3
"Control" Reference to the explanation of the parameters in Chapter 1.1 (Local control)
"Sequence" Reference to the explanation of the parameters in Chapter 1.2 (Sequence options)
Examples for the sequence control of Packages Operating Manual | Sequence Control for Packages
GSC TP
14 GEA Refrigeration Germany GmbH | E_301510_2 | Generated 17.12.2014