TABLE OF CONTENTS
1 General Information 5
1.1 Information on the Document
5
1.1.1 Binding Character of These Operating Instructions 5
1.1.2 Notes on the Illustrations 5
1.1.3 Symbols and Highlighting 5
1.2 Manufacturer address 6
1.3 Contact 6
1.4 EU Declaration of Conformity in accordance with the EC Machinery Directive 2006/42/EC 7
2 Safety 8
2.1 Intended use 8
2.1.1 Requirements for operation 8
2.1.2 Pressure equipment directive 8
2.1.3 ATEX directive 8
2.1.4 Improper operating conditions 8
2.2 Operator’s Duty of Care 9
2.3 Subsequent changes 10
2.4 General safety instructions and dangers 10
2.4.1 Principles for safe operation 10
2.4.2 Environmental Protection 10
2.4.3 Electrical Equipment 11
2.5 Supplementary Regulations 11
2.6 Qualification of personnel 11
2.7 Safety equipment 13
2.7.1 Signage 13
2.8 Residual dangers 13
2.9 Danger zones 14
3 Description 17
3.1 Design 17
3.2 Functional description 19
3.2.1 Control valve type P- P_F / P_J 19
3.2.2 Control valve type P - divert valve W/X 20
4 Transport and storage 21
4.1 Storage conditions 21
4.2 Transport 21
4.2.1 Scope of supply 22
5 Technical data 23
5.1 Type plate 23
5.2 Technical data 24
5.3 Seat leakage according to DIN EN 60534-4 25
5.4 Resistance and permitted operating temperature of the sealing materials 26
5.5 Pipe ends - General table of measurements 27
5.6 Tools 29
5.7 Lubricants 29
5.8 Weights 29
6 Assembly and installation 30
6.1 Safety instructions 30
6.2 Notes on installation 30
6.3 Control head 30
6.4 Valve with Detachable Pipe Connection Elements 30
6.5 Valve with Welded Ends 31
6.6 Pneumatic connections 32
6.6.1 Air Requirement 32
6.6.2 Establishing Hose Connections 32
6.7 Electrical connection with T.VIS control top 33
7 Start-up 34
7.1 Safety instructions 34
7.2 Notes on commissioning 34
8 Operation and control 35
8.1 Safety instructions 35
430BAL011665EN_5
21.03.2023 3
To Next Page
Loading...
Need help?
General
