Using the anal shower
Prerequisite
– You are sitting down on the WC seat
ring.
1 Press the<Shower> button on the
remote control.
2 Or: press the<Shower> button on
the lateral control panel.
Result
✓ The shower procedure starts with the
oscillating motion.
You can stop the shower procedure
early by pressing the <Shower>
button once again.
Switching the oscillating
motion of the anal shower on
and off
The oscillating motion of the spray
arm increases the cleaning effect.
Prerequisite
– The shower procedure is running.
▶ Press the [left] and [right] arrow keys
at the same time to switch the oscil-
lating motion off and on during the
shower procedure.
21
www.easycaresystems.co.uk