Geberit Sigma30 - Technical Specifications

EN
2
B1255-001 © 08-2015
966.920.00.0 (00)
Technical data
Mains operation Battery operation
Interval flush factory setting 24 h 24 h
Interval flush adjustment range 1–168 h 1–168 h
Flow rate at 1 bar with/without flow limiter 0.3/0.24 l/s 0.3/0.24 l/s
Maximum test pressure water 16 bar 16 bar
1600 kPa 1600 kPa
Maximum test pressure air/inert gas 3 bar 3 bar
300 kPa 300 kPa
Detection time factory setting 7 s 7 s
Detection time adjustment range 3–15 s 3–15 s
Nominal voltage 110–240 V AC –
Mains frequency 50–60 Hz –
Battery type – Alkaline manganese
battery 1.5 V (AA)
Alkaline manganese battery service life – ~ 2 years
Power consumption < 0.5 W < 0.5 W
Protection degree IP45 IP45
Operating voltage 4.5 V DC 3 V DC
Flush time factory setting 4 s 4 s
Flush time adjustment range 1–15 s 1–15 s
Relative humidity < 100% < 100%
Operating pressure 1–8 bar 1–8 bar
100–800 kPa 100–800 kPa
Maximum operating temperature water 30 °C 30 °C
GEBERIT