EasyManua.ls Logo

Geemarc Ampli550 - Safety Information

Geemarc Ampli550
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
No dial tone
• Check that all phone cord connections are securely
plugged into the telephone & wall jack.
• Check that the phone is in the correct dialing mode, tone or
pulse.
• Plug another phone into the wall jack to make sure your
phone service is working properly.
No audible ringer
• Make sure the ringer is not turned off.
• Check the volume level of the ringer.
• You may have too many extensions on your line. Try
unplugging a few devices.
No amplification
• Check to see if the Amplify key is "On". The red light
should be lit. Also check power supply connections.
Noise, Static, Interference while using the handset
• A filter may be required for homes with a DSL line or near
Radio towers.
Caller ID information does not show
• Make sure you are subscribed to Caller ID through your
local company.
TROUBLESHOOTING