Geemarc CL595 - Activate or Deactivate the Remote Access; Function Message Alert

36
17.5.8.2 Activate or Deactivate the Remote access
1. Press MENU/OK and / to select ANS. SYS.
2. Press MENU/OK and / to select SET TAM.
3. Press MENU/OK and / to select REMOTE ACC.
4. Press MENU/OK and / to select ON or OFF to turn on or off the remote access respectively.
5. Press MENU/OK to confirm.
17.5.9 Function message alert
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
1. Press MENU/OK, and ▼/▲ to select ANS.SYS.
2. Press MENU/OK, and ▼/▲ to show SET TAM.
3. Press MENU/OK and ▼/▲ to select MSG ALERT.
4. Press MENU/OK and ▼/▲ to select OFF.
5. Press MENU/OK to confirm.
ANSWERIN
G MACHINE