Geevon T228137 User Manual

Unit displays
1.Time display
2.Indoor temperature
3.Alarm
4.Channel select
5.Pool temperature
6.Alert signal
7.Pool highest temperature alert
8.Temperature trend
9.Pool lowest temperature alert
10.Hang hole
11.Battery Compartment 3xAAA (not included)
12.Pedestal
13.Sensor temperature display
14.Transmission light
15.Temperature sensor
Buttons
A: DOWN and alarm button
B: UP button
C: Channel select button
D: Snooze and light button
E: Mode (set ) button
Main function:
1. Time display
2. Indoor temperature display(℃/℉）:0℃ - 50℃
& 32℉ - 122℉
3. Pool temperature display(℃/℉）: -40℃ - 70℃
& -40℉ - 158℉
4. 12HR & 24HR
5. ℃ & ℉
6. Pool temperature
7. Highest and lowest temperature in the pool
8. Pool temperature alarm
9. Alarms with snooze function
10. Low battery indicator
11. Backlight
12. 3 channels for remote sensor
1. Setting up power supply Base device
Proceed as follows:
1.Remove the battery compartment cover.
2.Insert the batteries into the battery compartment.
3.Ensure that the battery polarity (+/-) is correct.
4. Replace the battery compartment cover.
Remote sensor:
1.Rotate right to open the sensor.
2.Insert the batteries into the battery
compartment. Ensure that the battery polarity
(+/-) is correct.
3.Press CH button to set the channel selector
switch to the desired channel.
GEEVON WIRELESS POOL THERMOMETER
Item No.T228137
User Manual
Thank you for purchasing T228137 pool ther-
mometer
Please take a moment to read this guide and
store it for future reference.
MODE
/ALARM
1 2
A B C D E F10
11
12
7
8
9
3
4
5
6
13
14
15

Geevon T228137 Specifications

General

Brand	Geevon
Model	T228137
Category	Thermometer
Language	English

Summary

Unit Displays and Buttons

Unit Displays

Lists the numbered items displayed on the unit.

Buttons

Lists the function of each labeled button.

Main Functions and Setup

Main Functions

Details the primary features and capabilities of the thermometer.

Setting Up Power Supply Base Device

Step-by-step guide for installing batteries in the base unit.

Setting Up Remote Sensor

Instructions for powering and configuring the remote sensor.

Time Setting

Procedure for manually setting the time on the base unit.

Alarm Setting

Instructions for setting and managing alarm times.

Snooze Function

How to activate the snooze feature when an alarm sounds.

C/F Select

Method for switching between Celsius and Fahrenheit units.

12/24H Select

Procedure to toggle between 12-hour and 24-hour time formats.

Channel Select

How to choose the remote sensor channel and search for signals.

Temperature Alert Setting

Guide to setting high/low temperature alerts and their activation.

Backlight

Instructions on how to turn on the display backlight.

Technical Information and Guidelines

Technical Data

Specifications for the main unit and remote sensor.

Important Placement Guidelines

Recommendations for optimal placement to maximize wireless range.

Technical Support

Contact information for product support and troubleshooting.