Geevon T208604 - User Manual

IN/OUT Wireless Thermometer
Item No.T208604
User Manual
Thank you for purchasing T208604 IN/OUT Wireless thermometer.
Please take a moment to read this guide and store it for future reference.
1.Controls and displays:
1. Indoor temperature
2. Time display
3. Outdoor sensor signal strength
4. Channel for external sensor
5. Outdoor temperature
6. Max. and Min. indoor temperature
7. Alarm icon
8. Outdoor sensor low battery indicator
9. Max. and Min. outdoor temperature
10. Snooze and backlight button
a. Turn on/off the backlight for 5s
b. Stop the alarm for 5 minutes
11. SET button
Hold for 3 seconds during the normal mode to enter setting mode.
12. DOWN button
a. Decrease the current setting value.
b. In normal display mode, press this button to switch between Celsius and
Fahrenheit.
13. UP button
a. Increase the current setting value.
b. Press this button to select the channel.
c. In normal display mode, press and hold to search RF.
14. ALARM button
a. Check the alarm time.
b. Set the alarm
15. Max/Min button
Check the max. and min. temperature
16. Integrated hang hole
17. Battery Compartment 2xAAA (batteries not included)
18. Stand bracket
19. Wireless signal indicator(Flashes when data is being sent to the display unit)
20. Integrated hang hole
21. Compartment 2xAAA batteries (batteries not included)
22. TX channel selector, select external sensor channel (Maximum 3 channels available)
2. Package Contents:
1. T208604 IN/OUT Wireless Thermometer
2. Outdoor remote sensor
3. Instructions Manual
3. Getting started
3.1 Inserting the batteries
• Place 2xAAA batteries into the T208604 IN/OUT Wireless Thermometer.
• Place 2xAAA batteries into the wireless sensor.
3.2 Replacing Batteries:
• We recommend using high quality batteries for the best product performance.
• Heavy duty or rechargeable batteries are not recommended.
• The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures
would cause alkaline batteries work improperly.
• Do not mix old and new batteries. Do not mix alkaline, standard, and rechargeable batteries.
3.3 Low Battery Indicator:
If the low battery indicator is displayed on the LCD for outdoor sensor, please immediately change
the batteries.
3.4 Default settings
1. Default time: 12:00 (Time form: 12H)
2. Default temperature: °F
3. Default alarm: AM 12:00, default snooze time: 5min.
When you first insert batteries or plug in the device, you will hear 1 beep, then the device will go
into a self-test mode, then RF receiving mode (for outdoor sensor). This will take about 3 minutes.
19
1
2
3
4
5
6
11
17
18
12 10 13 16 14 15
7
8
9
20
21
22

Summary

Controls and Displays

Package Contents

Getting Started

Inserting the batteries

Instructions for inserting batteries into the thermometer and wireless sensor.

Replacing Batteries

Recommendations for battery types and replacement procedures.

Low Battery Indicator

Explanation of the low battery indicator and required actions.

Default settings

Default time, temperature units, and alarm settings for the device.

Operation

Manually Setting the Time

Step-by-step guide for manually setting the device's time.

Alarm Clock

Setting, activating, deactivating, and stopping the alarm.

Temperature and Humidity

Details on indoor/outdoor temperature readings, range, and resolution.

Setting the Temperature Units

Instructions for switching between Celsius and Fahrenheit units.

Backlight

How to activate the backlight for 5 seconds.

Remote Sensor Transmission

Information on communicating with external sensors and selecting channels.

Care and Maintenance

Geevon T208604 Specifications

General

Brand	Geevon
Model	T208604
Category	Thermometer
Language	English