Gefen EXT-AVCONFS - Connecting the A;V Conference Room Processor; Video Source Connections; Audio Source Connections; Final Connections

14
CONNECTING THE A/V CONFERENCE ROOM PROCESSOR
How to Connect the A/V Conference Room Processor
1. Connect video source devices to the A/V Conference Room Processor video
inputs. The following inputs are available:
Front Panel Back Panel
HDMI N/A
DVI-I (analog and digital DVI) DVI-D (digital DVI)
VGA N/A
Component Component
2. Connect audio sources to the A/V Conference Room Processor audio inputs.
The following inputs are available:
Front Panel Analog L/R TOSLINK S/PDIF
HDMI (embedded) N/A N/A N/A
DVI-I ●●●
VGA ●●●
Component ●●●
Back Panel Analog L/R TOSLINK S/PDIF
DVI-I ●●●
Component ● N/A ●
NOTE: All inputs, except for HDMI, are able to accept both analog and
digital audio sources. Therefore, each input has a selector option in the OSD
that will allow the user to select the type of audio used.
3. Connect an HDMI cable from the A/V Conference Room Processor to an
HDTV display.
4. Connect the included 24 V DC power supply to the A/V Conference Room
Processor then connect the AC power cord to an available electrical socket.