40
RS-232 SERIAL COMMANDS
BRTNESS Command
The BRTNESS sets the brightness level of the output.
Syntax:
BRTNESS param1
Parameters:
param1 Value [0...100]
Notes:
The + or - character can also be used, in place of specifying a value, to increase
or decrease the brightness value by intervals of 1.
Use ? for param1 to retrieve the current value.
CLRTMP Command
The CLRTMP command sets the color temperature.
Syntax:
CLRTMP param1
Parameters:
param1 Temperature
Temperature Meaning
normal Normal color temperature
warm Warmer color tone (red)
cool Cooler color tone (blue)
user User specifi ed
Notes:
Use ? for param1 to retrieve the current value.
To Next Page
Loading...