Gefen GTV - Sender Unit Descriptions; Link Port Description; 5 V DC Power Input; Power LED Indicator

1 Link
Connects the Sender to the Receiver unit using CAT-5e (or better) cabling.
2 5V DC
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
3 Power
This LED will glow bright blue once the included 5V DC locking power supply
has been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
4 HDMI In
Connect a Hi-Def source device to this HDMI port. Please see the Features
section on page 3 for supported HDMI features.
5
SENDER UNIT DESCRIPTIONS