5
POWER LED1
The Power LED will be active when the unit is on. There is no LED active
when the unit is in off.
VIDEO LED2
This Video LED will be active when a valid composite source is connected
and selected.
S LED3
This S LED will be active when a valid s-video source is connected and
selected.
COMPONENT LED4
This Component LED will be active when a valid component source is
connected and selected.
USB LED5
This USB LED will be active when the user is in USB mode.
REC LED6
This Rec LED will be active when the unit is recording.
IR RECEIVER7
This remote must have a clear line-of-sight path to the IR receiver.
Obstructions in front of the IR receiver will prevent operation from the remote
control.
USB A INPUT PORT8
This port will accept a USB A type input. Usable media includes USB fl ash
drives and external hard drives.
S-VIDEO AUDIO INPUT9
L/R RCA stereo analog audio input for s-video.
COMPONENT AUDIO INPUT10
L/R RCA stereo analog audio input for component video.
COMPOSITE VIDEO INPUT11
480i and 576i composite video input.
S-VIDEO INPUT12
480i and 576i s-video input.
COMPONENT VIDEO INPUT13
480i and 576i component video input.
ANALOG AUDIO OUTPUT14
L/R RCA stereo analog audio output. The audio for the currently selected
source will be output from these ports.
PANEL DESCRIPTIONS
To Next Page
Loading...