918070/FP0811 3-23 Printed in U.S.A.
The lower front window can be removed and securely
stored in the glass holder (3, Figure 3-25) located on
the rear window.
Cab Door Latch Release – Optional Cab
When fully opened, the left cab door will lock in posi-
tion to the side of the cab. To release the latch, use the
black knob (1) located on the inside of the door. See
Figure 3-28.
Figure 3-28 Cab Door Latch Release
Interior Light
The interior light is located on the back of the cab
above the rear window. Press the switch to the right or
left to turn the light ON. Move the switch to the center
position to turn the light OFF.
Figure 3-29 Interior Light
Tool Kit and Cab Jack Handle
The machine tool kit and the cab jack handle are
located in the storage area under the hood in the engine
compartment.
Re-install the lower window before lowering
the windshield.
1
Model 503Z/603 -- Serial Numbers AH02282 and earlier
shown -- later serial numbers similar
To Next Page
Loading...
