8.7.7.1 Positioner
System deviation
(dead zone):
1 % default setting
≥ 0.1 % (adjustable)
≤ 2.0 % (preset, K-no. 2442)
≤ 5.0 % (preset, K-no. 2443)
Parameterisation: adjustable
Initialization: automatic or manual
Close tight function: option
8.7.7.2 Process controller
Option only for device version code PA01
Controller type: Continuous controllers
PID parameters: adjustable
Process actual value in-
put:
0/4 - 20 mA (adjustable)
8.7.8 Interfaces
RS232 Profibus DP DeviceNet Profinet
Function Parameterization via
web browser
Parameterization/process data
Transmission rates - 9.6k /19.2k / 45.45k /
93.75k / 500k / 1.5M /
3M / 6 M / 12 M baud**
125k / 250k / 500k
baud
100M baud***
** Auto Baud: The device has an Auto Baud function and therefore automatically adjusts to the bus-side configuration of the
transmission rate.
*** Two switches are connected in series internally between connection X1 and X3.
Communication lead time during operation in line structure (connection X1 and X3) therefore double that of a "standard two-
port device".
GEMÜ 1436 cPoswww.gemu-group.com 15 / 76
8 Technical data
To Next Page
Loading...
Need help?
General