Gema OptiFlex Pro B User Manual

Rev. 00 03/19
OptiFlex Pro B Assembly / Connection

23
Assembly / Connection
Set-up
The manual coating equipment should always be set up vertically on a flat
surface.
WARNING:
Surrounding temperature too high
► Install the equipment only in locations with an ambient
temperature of between +5 and +40 °C, i.e. never next to heat
sources (such as an enameling furnace) or electromagnetic
sources (such as a control cabinet).
Assembly guide
The manual coating equipment must be set up in accordance with the
setup and connecting instructions (included with delivery).
fig.
6

Gema OptiFlex Pro B Specifications

General

Brand	Gema
Model	OptiFlex Pro B
Category	Paint Sprayer
Language	English