9
Winding the Bobbin
Place a thread spool on the spool pin (a). (Pic 1)
Take the thread from the spool through the bobbin
thread guide and wind the thread a few times by
hand around the empty bobbin in a clockwise
direction. Push the bobbin to the right towards the
bobbin winding position. (Pic 1 and Pic 2)
Turn the machine on and press the foot control
gently. The bobbin will stop winding when it is full.
Push the bobbin to the left to “sewing position”
and remove it.
Please Note:
When the bobbin winder spindle
is in “bobbin winding” position,
the machine will not sew and the
handwheel will not turn. To start
sewing, push the bobbin winder
spindle to the left (sewing
position).
To Next Page
Loading...
Need help?
General