Gemm New Runner BCB/05US - Cleaning the Outside of the Appliance; Authorized Personnel

BCB US Rev.00 01-2019 pag. 33
8.2.3 – CLEANING THE OUTSIDE OF THE APPLIANCE
Carry out this operation whenever necessary.
APPLIANCE STATUS:
- I/O main switch in position “O” (OFF);
- power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
METHOD
Clean the outer surface of the appliance (steel base and panelling), using a non-abrasive sponge soaked in neutral
detergent. Rinse with a sponge soaked in water and dry with a clean cloth.
Use exclusively water and non-abrasive neutral detergent for cleaning. The use of different products
could damage the surface of the appliance and compromise the quality and healthiness of the
product being processed.
Do not use abrasive sponges.
When cleaning do not use cloths that leave lint.