BCB US Rev.00 01-2019 pag. 34
8.2.4 – CLEANING THE CONDENSER
Carry out this operation every 30 days.
APPLIANCE STATUS:
- I/O main switch in position “O” (OFF);
- power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
METHOD
To ensure that the appliance works properly and efficiently, the air condenser (ref. 1 fig. 9) must be kept clean so that the
air can circulate freely. This operation should be carried out every 30 days. Remove the control panel by loosening the
screws (ref. 2 and 3 fig. 9). Clean with a non-metal brush to remove all the dust and fluff from the fins. It is advisable to
use a vacuum cleaner so that dust does not float in the air. If there are greasy deposits, eliminate with a brush soaked in
alcohol. DO NOT SCRAPE THE SURFACES WITH POINTED OR ABRASIVE OBJECTS.
The condenser has sharp edges. When carrying out the operations mentioned above, wear safety
gloves, goggles and face masks.
To Next Page
Loading...
