Content
General information 4
Issues 5
Screen turns OFF immediately as the key is turned
to the o position
Equipment cannot be used after logging in
Operator does not get logged out of
the session
Touch screen has suddenly stopped working
Screen does not power OFF at all
Screen powers OFF and then powers ON
immediately
Screen restarts upon crank
Operators cannot log into the screen
Override code does not work
Screen does not turn ON when key is turned
to On
Screen does not connect in
RFID Scanner was picking up cards
and now it does not
Impact alarm keeps going o
Can be driven without logging in
GPS location cannot be seen on the website
BMS information is not coming up
on the display
Scale is not displaying any weight
Weight on scale page is jumping
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
10
10
10
To Next Page
Loading...