Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
genebre@genebre.es - www.genebre.es
LAST UPDATE: 17/06/2019 UPDATE NUMBER: 1
Retransmitter Technical Specifications
-20ºC / 60ºC ( -4 / 140ºF)
3. Safety Instructions
The scope of this manual is to allow technically competent users to install, start up,
operate and inspect Genebre electro-pneumatic positioners. Qualified personnel must be
well versed with all the warnings and notes detailed in these instructions. Failure to
observe the warnings and notes could result in personal injury and material damage.
Certain parts of the positioner are subject to mechanical movement which
could cause injury.
Any work carried out on the system or electrical equipment must be performed
by qualified technicians or by specially trained personnel under the control and
supervision of said technicians, in accordance with safety regulations and
standards, as well as any other applicable national legislation.
Any misuse could cause serious damage to the components, installations and
the equipment itself as well as personal injury. Under no circumstances must
any component or part of the positioner be modified or altered. Any such
alterations or modifications shall automatically invalidate the intended use of
the positioner.
To Next Page
Loading...