Need help?Do you have a question about the Genelec 4010A and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Recommended usage | Studio |
| Frequency range | 67 - 25000 Hz |
| RMS rated power | 30 W |
| Sound pressure level (max) | 96 dB |
| Tweeter | Yes |
| Speaker type | - |
| Tweeter diameter | 19 mm |
| Speaker enclosure | Reflex |
| Speaker placement | Floor, Tabletop/bookshelf |
| Audio output channels | - channels |
| AC input voltage | 100-240 V |
| AC input frequency | 50-60 Hz |
| Amplifier class | D |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 115 mm |
|---|---|
| Width | 121 mm |
| Height | 181 mm |
| Weight | 1500 g |
List of items supplied with the loudspeaker, including mains cable, audio signal connector, and wallmount.
Instructions for connecting audio signal cables and mains cables to the loudspeaker.
Automatic standby mode activation after 1 hour of no signal, resuming playback when signal is detected.
Two alternative settings for input sensitivity (normal and -10 dB) for playback level adjustment.
Attenuates treble response above 5 kHz by 2 dB to smoothen excessively bright sound systems.
Provides three attenuation levels (-2, -4, -6 dB) for bass response below 2 kHz.
Aim acoustic axes towards the listening area center for optimal sound staging.
Place loudspeakers away from reflective surfaces to avoid unwanted sound colouration.
Ensure 3 cm clearance behind, above, and on sides for cooling and port function.
Detailed technical parameters including frequency response, output levels, and dimensions.
Information on input connector, sensitivity levels, and crossover frequency settings.
Specifications for amplifier power, distortion, operating range, and power consumption.
To Next Page
