Need help?Do you have a question about the Genelec 1030A and is the answer not in the manual?
General| Frequency Response | 58 Hz - 20 kHz (±2.5 dB) |
|---|---|
| Amplifier Power (LF) | 50 W |
| Amplifier Power (HF) | 50 W |
| Type | Active Studio Monitor |
| Crossover Frequency | 3 kHz |
| Maximum SPL | 108 dB |
| Input | XLR |
| Driver Size | 6.5 inch (woofer), 3/4 inch (tweeter) |
Details about the bi-amplified GENELEC 1030A two-way active monitoring speaker.
Information on the 170mm bass driver and 19mm metal dome tweeter.
Explains the active crossover network and its tone controls.
Information on the integrated bass and treble amplifiers.
How to match speaker sensitivity to the audio source for accurate level matching.
Adjusting treble tilt, bass tilt, and bass roll-off for acoustic environments.
Instructions for rotating the DCW plate for different mounting orientations.
Advice on positioning speakers on a console to avoid sound coloring.
States that only qualified personnel should perform maintenance or adjustments.
General safety precautions for operating the speaker system.
Lists optional accessories such as protective grilles and mounting hardware.
Details the one-year guarantee against manufacturing faults or defects.
Technical details including frequency response, SPL, and driver sizes.
Specifications for amplifier output, distortion, and crossover characteristics.
To Next Page
