Need help?Do you have a question about the Genelec 8030A and is the answer not in the manual?
General| Product color | White |
|---|---|
| Recommended usage | Other |
| Suitable for outdoor use | - |
| Tweeter | Yes |
| Speaker type | 2-way |
| Number of drivers | 2 |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 5 \ |
| Tweeter diameter (imperial) | 0.75 \ |
| Impedance | - Ω |
| Sensitivity | 100 dB |
| Frequency range | 55 - 21000 Hz |
| RMS rated power | 80 W |
| Crossover frequency | 3000 Hz |
| Total Harmonic Distortion (THD) | 2 % |
| Connectivity technology | Wired |
| Cables included | AC |
Weight and Dimensions| Depth | 178 mm |
|---|---|
| Width | 189 mm |
| Height | 299 mm |
| Weight | 5600 g |
Overview of the GENELEC 8030A bi-amplified active monitoring loudspeaker's design and capabilities.
Guidance on placing the loudspeaker for optimal acoustic axis alignment and convergence at ear height.
Instructions for safely connecting the loudspeaker, including pre-connection checks and control locations.
Details on audio input via XLR, including handling unbalanced sources by grounding pin 3 to pin 1.
Information on using the XLR output for daisy-chaining multiple speakers or connecting a subwoofer.
How to adjust the input sensitivity to match the audio signal source using the front panel volume control.
Adjusting the frequency response to suit the acoustic environment using rear panel tone control switches.
Adjusting treble response above 5 kHz by 2 dB to smooth bright-sounding systems.
Three attenuation levels for bass response below 1 kHz, useful for speakers near room boundaries.
Activating a high-pass filter at 85 Hz to complement a subwoofer, essential for use with 7050B.
Guidelines for proper loudspeaker placement, including alignment, symmetry, and minimizing acoustic reflections.
Maintaining adequate ventilation and space around the unit for cooling and proper function of the reflex port.
Details on Iso-Pod, adjustable mounting points, and threaded hole for various loudspeaker placement options.
Information that the unit contains no user-serviceable parts and repairs must be done by qualified personnel.
Crucial warnings regarding servicing, electrical safety, water exposure, sound levels, ventilation, and power disconnection.
Comprehensive technical specifications covering frequency response, output, noise, distortion, drivers, and physical dimensions.
Specifications for input/output connectors, input sensitivity, volume control range, and crossover frequency.
Details on amplifier power output, distortion levels, signal-to-noise ratio, mains voltage compatibility, and power consumption.
Statement certifying the 8030A's compliance with relevant safety and EMC standards and EU directives.
To Next Page
