Need help?Do you have a question about the Genelec 8020C and is the answer not in the manual?
General| Type | Active Studio Monitor |
|---|---|
| Configuration | 2-way |
| Amplifier Power (LF) | 50 W |
| Crossover Frequency | 3 kHz |
| HF Driver Size | 0.75 inches |
| Amplifier Power (HF) | 50 W |
| Input Connectors | XLR |
| Enclosure Type | Bass-reflex |
| LF Driver Size | 4" / 105 mm |
Guidelines for placing loudspeakers for optimal acoustic axis alignment.
Instructions for audio input and mains connection.
Automatic standby mode and signal sensing feature.
Adjusting input sensitivity via the front panel control.
Attenuates treble response above 5 kHz by 2 dB for smoother sound.
Provides bass response attenuation for placement near boundaries.
Activates a high-pass filter at 85 Hz to complement subwoofers.
Aim acoustic axes towards the listening position for optimal sound.
Place loudspeakers symmetrically and equidistant from the listening position.
Position loudspeakers away from reflective surfaces to avoid sound colouration.
Ensure adequate space for cooling and reflex port function.
Details on Iso-Pod™ and threaded hole mounting.
Only qualified personnel should perform servicing or repair.
Important warnings for safe operation and electrical safety.
Product is guaranteed for two years against faults.
Device complies with Part 15 of FCC Rules for digital devices.
Detailed technical data including frequency response and dimensions.
Information on input, crossover frequency, and tone control ranges.
Specifications for amplifier output power and distortion.
To Next Page