Need help?Do you have a question about the Genelec 8020D and is the answer not in the manual?
General| Frequency Response | 56 Hz - 25 kHz (-6 dB) |
|---|---|
| Input Connectors | 1 x XLR |
| Type | Active Studio Monitor |
| Configuration | 2-way |
| Crossover Frequency | 3 kHz |
| Enclosure Type | Bass Reflex |
| Weight | 3.2 kg |
| Woofer Size | 4 inch |
| Tweeter Size | 0.75" |
| Amplifier Power | 50 W (LF), 50 W (HF) |
| Driver Size | 4 inch Woofer, 3/4 inch Tweeter |
Guidance on proper loudspeaker placement for optimal sound.
Ensuring correct vertical positioning of speakers.
Importance of symmetrical speaker setup for balance.
Optimal speaker angles and distances for listening position.
General overview of the 8020D active monitoring system.
Guidelines for placing the loudspeaker correctly.
Instructions for connecting the loudspeaker.
Details of the Intelligent Signal Sensing™ autostart function.
Adjusting the input sensitivity control.
How to adjust speaker frequency response using tone controls.
Attenuates bass frequencies around 200 Hz by 4 dB.
Attenuates treble response above 5 kHz by 2 dB.
Adjusts bass response below 2 kHz in -2 dB steps.
Activates a -4 dB filter for lowest bass frequencies.
Guidance on aligning, symmetry, reflections, clearances, and mounting options.
Information on servicing and repair by qualified personnel.
Crucial safety warnings and precautions for safe operation.
Product warranty details and terms.
Regulatory compliance information.
Technical specifications of the 8020D.
Details on crossover frequencies and controls.
Technical details of the amplifier section.
To Next Page
