Need help?Do you have a question about the Genelec 8020B and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Recommended usage | Other |
| Suitable for outdoor use | - |
| Tweeter | Yes |
| Number of drivers | 2 |
| Speaker placement | Ceiling-mountable, Tabletop/bookshelf, Wall-mountable |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 4 \ |
| Tweeter diameter (imperial) | 0.75 \ |
| Impedance | - Ω |
| Sensitivity | 95 dB |
| Frequency range | 65 - 21000 Hz |
| RMS rated power | 40 W |
| Total Harmonic Distortion (THD) | 3 % |
| Connectivity technology | Wired |
| Power source type | AC |
Weight and Dimensions| Depth | 142 mm |
|---|---|
| Width | 151 mm |
| Height | 242 mm |
| Weight | 8100 g |
Guidance on placing the loudspeaker in the listening position for optimal acoustic performance.
Instructions for connecting the loudspeaker to power and audio sources safely.
Adjusting input sensitivity to match the signal source output.
Adjusting frequency response using Treble Tilt, Bass Tilt, and Bass Roll-Off.
Suggested tone control settings for differing acoustical environments.
Advice on correct placement, symmetry, and minimizing reflections for optimal acoustics.
Detailed technical data including frequency response, output levels, drivers, and dimensions.
Information on input connector, input level, volume control, and crossover frequency.
Details on amplifier output power, distortion, signal-to-noise ratio, and power requirements.
Certification of Genelec 8020B compliance with safety and EMC standards.
To Next Page
