Need help?Do you have a question about the Genelec 1031A and is the answer not in the manual?
Frequency Response| lower cut-off frequency | < 47 Hz |
|---|---|
| upper cut-off frequency | > 22 kHz |
| free field frequency response | 48 Hz - 22 kHz (± 2 dB) |
Acoustic Output| maximum short term sine wave acoustic output @ 1m | > 110 dB SPL |
|---|---|
| maximum short term sine wave acoustic output @ 0.5m | > 116 dB SPL |
| maximum peak acoustic output per pair on top of console @ 1m | > 120 dB |
Amplifier Specifications| bass amplifier output power | 120 W |
|---|---|
| treble amplifier output power | 120 W |
| slew rate | 80 V/µs |
Power| mains voltage | 100/200 V or 115/230 V |
|---|---|
| voltage operating range at 230V setting | 207 - 253 V (± 10%) |
| voltage operating range at 115V setting | 104 - 126 V (± 10%) |
| power consumption idle | 30 W |
| power consumption full output | 160 W |
Weight and Dimensions| weight | 12.7 kg |
|---|---|
| height | 395 mm |
| width | 250 mm |
| depth | 290 mm |
Details the bi-amplified 1031A speaker, its applications, and core technologies like DCW.
Explains the bass and treble drivers, magnetically shielded design, and active crossover.
Describes the rear-mounted amplifier, power output, and protection circuitry.
Provides instructions on speaker placement, orientation, and ventilation.
Guide on adjusting input sensitivity to match the source.
Details on adjusting treble tilt, bass tilt, and bass roll-off.
Table providing recommended tone control settings for various room environments.
Instructions for mounting orientation and rotating the DCW plate.
Advice against mounting on meter bridges and suggests floor stands.
Explanation of the 'OVL' and 'ON' LEDs and their meanings.
States that no user-serviceable parts are inside; use qualified personnel.
Highlights safety warnings related to servicing, earthing, and liquids.
Detailed technical specifications for system, crossover, and amplifier sections.
To Next Page
