Need help?Do you have a question about the Genelec 1032C and is the answer not in the manual?
Attenuates monitor output near the cut-off frequency with selectable levels of -2, -4, or -6 dB.
Attenuates bass frequencies around 160 Hz by 4 dB to compensate for room boundary effects.
Provides three attenuation levels (-2, -4, -6 dB) for bass response below 800 Hz near room boundaries.
Adjusts treble response above 5 kHz by +2, -2, or -4 dB for tonal correction.
Disables the front panel LED light, useful for dark environments or specific monitoring setups.
Activates automatic power saving function, putting the monitor into a low-power sleep state.
Configures digital audio channel selection for AES/EBU inputs, including summing A/B channels.
Scales down monitor output level in 10 dB steps, adding to rotary control for a total range of -42 dB.
Selects between on-monitor controls or GLM-stored settings, overriding local adjustments.
Important warnings and precautions for safe operation and to maintain the monitor under safe operating conditions.
To Next Page
General
