Creating a balanced surround sound monitoring environment calls
for matched loudspeakers and subwoofers. The Genelec DSP
Systems offer several different alternatives to suit your space and
SPL requirements. Here are some examples of balanced loudspeaker/
subwoofer combinations for small and medium mixing environments.
Please visit our website www.genelec.com* for recommended system
setups for different room sizes.
*www.genelec.com/learning-center/suggested-system-setups
Stereo and Surround Sound Environments
5 x 8240A + 7270A = 8240A DSP Surround Set
5 x 8130A + SE7261 + GLM.SE™ = Digital PowerPak™
2 x 8130A + SE7261 + GLM.SE™ = Digital TriplePlay™
2 x 8250A + 7270 + GLM™ = 8250 DSP StereoPak
Contemporary audio production facilities are in transition from analog to
digital with Genelec DSP monitoring systems on the forefront. While console
technology advances, monitor paths have remained largely analog, with only
a few manufacturers offering digital audio monitoring output. Environments
with such digital capabilities integrate seamlessly with our DSP Systems.
In response to those customers who wish to interface conventional analog
monitoring sections to Genelec DSP and SE
™ DSP systems, Genelec
proudly announces the AD9200A eight-channel analog to digital converter.
AD9200A Analog to Digital Converter
Eight-channel balanced analog input is delivered via a 25-pin DB25
connector wired to the Tascam/ProTools industry standard pinout. Digital
output consists of four XLR connections, each carrying two channels of
AES/EBU audio. The AD9200A converter outputs AES3 format with 24 bit
word length and 192 kHz sample rate, providing the same consistent high
quality found on our 8200 DSP products.
5 x 8250A + 7271A + GLM™ = 8250A DSP Surround Set
To Next Page
Loading...
Need help?
General
