2
Introduction
Thank you for choosing Genelec! Fulfilling dreams by offering
people the most truthful sound reproduction possible has been
the source of our enthusiasm since 1978. There s already over
one million Genelec monitors around the world - welcome to
our story!
All Genelec monitors are designed to last, hand built in
Iisalmi, Finland using certified sustainable methods, individually
tested and calibrated, and have long support for spare parts.
They have also all been designed for low power consumption
when in use and during automatic standby.
Please register your monitor at http://www.community.
genelec.com/. You will receive an extended 5 year warranty
for spare parts. For more information about our service and
technical support, please visit
http://www.genelec.com/customer-service.
System Characteristics
Each 8351B is supplied with GLM User Kit, one mains power
cable, one 5-meter GLM network cable and this operating
manual.
The Genelec 8351B is suitable for professional monitoring
applications calling for very high precision and reliability.
It combines many remarkable Genelec technologies to
provide point source benefits with directivity control over an
extraordinarily wide audio bandwidth.
Genelec Loudspeaker Manager™ (GLM™)
Software And GLM User Kit
The GLM software gets the most out of 8351B and tailor-fits it to
your room. GLM is available for download free of charge at www.
genelec.com/glm. Check in from time to time to take advantage
of new features, or consider using the cloud-based version. A
GLM User Kit comprising the necessary hardware, including the
GLM Adapter and measuring microphone is needed for building
and operating the GLM network. This kit is included withe every
8351B.
Minimum Diffraction Coaxial (MDC™)
The minimum diffraction coaxial driver consists of a powerful
midrange driver combined with a tweeter driver extending to
ultrasonic frequencies and unparalleled directivity control.
This unique design minimizes acoustic diffraction sources that
typically exist in coaxial drivers and produces a flat frequency
response both on the acoustical axis and at all off-axis directions.
The 8351B may be oriented either horizontally or vertically
and is intended for near-field listening where the influences of
the room can be mostly minimized. Typical distances can vary
from 1 meter or less to 3 meters depending on room size and
SPL requirements.
Directivity Control Waveguide (DCW™)
The 8351B has an exceptionally large directivity control
waveguide extending over the whole front face of the enclosure.
The midrange driver cone also forms a part of the directivity
control waveguide for the tweeter. From behind the waveguide,
two woofers radiate audio through two openings in the enclosure
front. This unique design enables directivity control of all audio
frequencies down to low bass.
Acoustically Concealed Woofers (ACW™)
A pair of nearly invisible woofers in the 8351B are placed
acoustically coaxially with the midrange/tweeter drivers to
create a three-way system with all drivers having their acoustical
axes in the same position. This creates an ideally working point
source radiator.
Smart Active Monitor (SAM™)
Genelec SAM technology can improve the reliability and accuracy
of monitoring. Smart Active Monitors have several parametric
notch and shelving filters that can be tuned automatically using
the Genelec Loudspeaker Manager (GLM) software to exactly
compensate for colorations generated by room acoustics. This
enables SAM monitors to sound neutral and achieve accurate
stereo imaging in all acoustical environments.
Audio Inputs
The 8351B’s audio inputs are designed to integrate easily into
all professional environments, supporting balanced line level
analog and AES/EBU format digital signal. The maximum analog
input level is +25 dBu (13.7 Vrms or 19.5 V peak). Set to the
maximum sensitivity, an analog input signal of -6 dBu produces
100 dB SPL sound level at 1 meter in free space. A -30 dBFS
digital audio input level produces 100 dB SPL level at 1 meter
in free space. Note that 0 dBFS refers to the largest possible
digital input value.
Analog input is selected when the AES/EBU signal input is not
connected. The AES/EBU format digital audio input is selected
automatically when a valid digital audio signal is present. Please
note that this digital audio signal may be silence. This automatic
input selection can be overridden when the 8351B is controlled
with the GLM network, enabling flexible selection of either input.
When using a digital audio source with adjustable level, it
may instead be advantageous to lower the output level of the
8351B using the monitors on-board rear panel controls. This
enables the use of a higher source output level with more digital
resolution, while taking full advantage of 8351B’s impressively
low self generated noise.
The AES/EBU input supports two channels of audio in a
single cable. The DIGITAL OUT male XLR connector carries an
unaltered copy of the digital input signal. This enables daisy-
chaining of up to four monitors. The proper digital channel can
be selected using DIP switches or GLM.
Power Management
The 8351B mains power input supports any mains voltage
globally (100-240 VAC, 50-60 Hz). It can be plugged in anywhere
in the world and will always deliver the maximum output power
to the drivers even when the mains voltage fluctuates. If mains
power is provided with a generator, inverter or lower-quality UPS
device, we recommend filtering out harmonics from the mains
power voltage.
The energy saving function Intelligent Signal Sensing (ISS™)
puts the monitor automatically into a sleep state when no
input signal is present. The device then consumes less than
one watt of power. Upon sensing an input signal, the monitor
automatically awakens. The standby time until entering the
power saving state can be configured using the GLM software.
When ISS is active, you can leave your monitors on at all times
and have the monitoring system immediately ready for action.
To Next Page
Loading...
