Generac Power Systems Automatic Standby Generator User Manual

32 Automatic Standby Generator Owner’s Manual
STEPPER
OVERCURRENT
Unit will not start in AUTO with utility
loss.
RED
Check the
LEDs/Screen
for alarms.
Contact servicing dealer.
MISWIRE
Unit will not start in AUTO with utility
loss.
RED
Check the
LEDs/Screen
for alarms.
Contact servicing dealer.
OVERVOLTAGE
Unit will not start in AUTO with utility
loss.
RED
Check the
LEDs/Screen
for alarms.
Contact servicing dealer.
LOW BATTERY Yellow LED illuminated in any state.
YELLOW
Check screen
for additional
information.
Clear alarm. From the MAIN menu on
the control panel, navigate to the BAT-
TERY MENU. Contact servicing dealer if
battery is GOOD. Replace battery If
CHECK BATTERY is displayed.
BATTERY
PROBLEM
Yellow LED illuminated in any state. YELLOW
Check screen
for additional
information.
Contact servicing dealer.
CHARGER
WARNING
Yellow LED illuminated in any state.
YELLOW
Check screen
for additional
information.
Contact servicing dealer
SERVICE A Yellow LED illuminated in any state. YELLOW
Check screen
for additional
information.
Perform SERVICE A maintenance;
press ENTER to clear.
SERVICE B Yellow LED illuminated in any state. YELLOW
Check screen
for additional
information.
Perform SERVICE B maintenance;
press ENTER to clear.
Inspect Battery Yellow LED illuminated in any state. YELLOW
Check screen
for additional
information.
Inspect battery; press ENTER to clear.
Active Alarm
Problem LED
Things to
Check
Solution

Generac Power Systems Automatic Standby Generator Specifications

General

Brand	Generac Power Systems
Model	Automatic Standby Generator
Category	Inverter
Language	English