GGeenneerraacc GGNN--557700 EEnnggiinnee
READ THIS MANUAL THOROUGHLY
If you do not understand any portion of this manual, contact
Generac or your nearest Generac Authorized Service
Dealer for a demonstration of actual starting, operating and
servicing procedures.
Throughout this publication, and on tags and decals affixed
to the unit, DANGER, WARNING, CAUTION and NOTE
blocks are used to alert you to special instruction about a
particular operation that may be hazardous if performed
incorrectly or carelessly. Observe them carefully.
These safety warnings cannot eliminate the hazards that
they indicate. Strict compliance with the special instructions
while performing the service plus common sense are major
measures to prevent accidents.
The following definitions apply to DANGER, WARNING,
CAUTION and NOTE blocks found throughout the manual.
DANGER: After this heading, you can read handling,
installing, operating or servicing instructions that, if not
strictly complied with, will result in personal injury.
WARNING: After this heading, you can read handling,
installing, operating or servicing instructions that, if not
strictly complied with, may result in personal injury.
CAUTION: After this heading, you can read handling,
installing, operating or servicing instructions that, if not
strictly complied with, could result in damage to equip-
ment and/or property.
NOTE: After this heading, you can read explanatory state-
ments that require special emphasis.
These symbols indicate the following:
Points out important safety information and, if not fol-
lowed, could endanger personal safety and/or property
of yourself and others.
Points out potential explosion hazard.
Points out potential fire hazard.
Points out potential electrical shock hazard.
The operator is responsible for proper and safe use of the
equipment. We strongly recommend that the operator read
this
Owner's Manual
and thoroughly understand all instruc-
tions before using this equipment. We also strongly recom-
mend instructing other users to properly start and operate
the unit. This prepares them if they need to operate the
equipment in an emergency.
OPERATION AND MAINTENANCE
It is the owner’s/operator's responsibility to perform all safe-
ty checks, to make sure that all maintenance for safe oper-
ation is performed promptly, and to have the equipment
checked by an authorized dealer periodically. Normal main-
tenance service and replacement of parts are the responsi-
bility of the owner/operator and, as such, are not considered
defects in materials or workmanship within the terms of the
warranty. Individual operating habits and usage contribute to
the need for maintenance service.
Proper maintenance and care of your engine ensures a
minimum number of problems and keeps operating expens-
es at a minimum. See your authorized dealer/distributor for
service aids and accessories.
To Next Page
Loading...
Need help?
General
