SECIION
8: LUBRICATION
SYSTEM
5.
3.
Whenchangingtheoilfiter,usethefollowinginstruction5:
A) Locate
oil fiiler
(Fig
ure
8-4).
B)
Placea suitablecontain-"r
beneath the oilfilterand
turn
the fiher
counterclockwise 1o rcmove
the filter
C) Coat
the
gasket
of a new filter
with engine
oil.
Turn
the new
filter clockwise
until the
gasket
contacts
the
filter adapter,
then tighten an additional3/4
turn.
Remove the
oil fill cap and insert
a clean funnel Inro
rne
oilfill
opening. Flllthe
crankcase with the recommended
oil
until the oii level is
at the
full
point
on
the dipstick.
approximately
2030 ml
(2.I
qt.)are
requ redwhenchang,
ing the oiland
oilfilter POUR SLOWLY
When thecrankcase
G filied
tothe
prope.level,
installthe
oil fill
cap. Start engine
to
{ili
oil filter, rechecucorrecr
orl
ott cootER:
some engines areequippedwth
an oilcoolerTheo
lcooter
is
mounted on the blower housing.
Forced
airfrom the fLylvheel
fanflowsthroughtheoilcoolerfinsdissipating
heatfromthe
engine oil.
The
oil cooler fins should
be cleaned every
100 hou6
and
checked
periodicallyfor
debris
and cleaned
with compressed
air or a soft brBtle
brush.
rigure
8-5. Oil Cooler
8-3
To Next Page
Loading...
Need help?
General
