EasyManuals Logo
Home>Generac Power Systems>Portable Generator>MLG20ICAN

Generac Power Systems MLG20ICAN User Manual

Generac Power Systems MLG20ICAN
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Owner’s Manual for Mobile Generator 17
Maintenance
Lower Radiator Hose Heater Option -
Use and Maintenance
The following points should be followed when operating a
unit equipped with a lower radiator hose heater.
Verify the cooling system is full of the proper
mixture of water and engine coolant before each
heater use.
The heater is designed for all-night operation,
however, 2-5 hours of heating just prior to starting
is usually sufficient for proper engine starting.
The unit must be level to maintain proper
orientation of the heater while it is in operation.
Use only an undamaged, outdoor rated, three-
prong grounded 120VAC extension cord with a
minimum amperage rating of 10A. Connect the
cord to a properly grounded 120VAC, GFCI
receptacle.
Before starting the engine, unplug the extension
cord from the power, then unplug the heater
cordset from the extension cord.
WARNING
Personal Injury. Do not modify the location of the
lower radiator hose heater. Improper use of hose
heater could result in personal injury or engine
damage.
(000339)

Other manuals for Generac Power Systems MLG20ICAN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems MLG20ICAN and is the answer not in the manual?

Generac Power Systems MLG20ICAN Specifications

General IconGeneral
BrandGenerac Power Systems
ModelMLG20ICAN
CategoryPortable Generator
LanguageEnglish

Related product manuals