Generac Power Systems MMG120 User Manual

MMG120 Generac Specifications Continued:
Manufactured by Magnum Power Products LLC., a wholly owned subsidiary of Generac Power Systems, Inc.
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
Page 3 of 4
4/12
ENCLOSURE
 Generac Mobile Power decals
 Aluminum, sound attenuated enclosure
o UV & fade resistant, high temperature cured, white polyester powder paint
o Insulated and baffled
o 68 dB(A) at 23 feet – prime power
 Fully lockable enclosure including doors and fuel fill
 Stainless steel hinges on doors
 Emergency stop switch located on outside of enclosure
 Central lifting point
 Multi-lingual operating/safety decals
 Document holder with operating manual including AC/DC wiring diagrams
TRAILER
 DOT approved tail, side, brake, and directional lights
o Recessed rear lights
 Transportation tie downs
 Safety chains with spring loaded safety hooks
 3” lunette ring hitch
 (2) 6000 lb. axles with surge brakes
 5000 lb. tongue jack with footplate
 7.50x16E-6-W tubeless tires – 10 ply
WEIGHTS & DIMENSIONS
Skid mounted
 Dry weight: 5429 lbs (2463 kg)
 Operating weight: 7914 lbs (3590 kg)
 132 x 50 x 77 in
(3.35 x 1.27 x 1.95 m)
Trailer mounted
 Dry weight: 6825 lbs (3096 kg)
 Operating weight: 9310 lbs (4223 kg)
 210 x 86 x 93 in
(5.33 x 2.18 x 2.36 m)
WARRANTY
 Engine and generator covered under OEM warranty – consult factory for details.
CERTIFICATIONS
 CSA certified

Generac Power Systems MMG120 Specifications

General

Brand	Generac Power Systems
Model	MMG120
Category	Inverter
Language	English