EasyManuals Logo

Generac Power Systems PowerDial RS8000E User Manual

Generac Power Systems PowerDial RS8000E
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
10 Owner’s Manual for Portable Generator
3. Clean area around fuel cap and remove
cap slowly.
4. Slowly add recommended fuel (A). Do not
overfill (B). See Figure 2-12.
5. Install fuel cap.
Figure 2-12. Add Recommended Fuel
NOTE: Allow spilled fuel to evaporate before
starting unit.
IMPORTANT NOTE: It is important to pre-
vent gum deposits from forming in fuel
system parts such as the carburetor, fuel
hose or tank during storage. Alcohol-
blended fuels (called gasohol, ethanol or
methanol) can attract moisture, which
leads to separation and formation of acids
during storage. Acidic gas can damage the
fuel system of an engine while in storage.
To avoid engine problems, the fuel system
should be emptied before storage of 30
days or longer. See the Storage section.
Never use engine or carburetor cleaner
products in the fuel tank as permanent
damage may occur.
000400
A
B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems PowerDial RS8000E and is the answer not in the manual?

Generac Power Systems PowerDial RS8000E Specifications

General IconGeneral
BrandGenerac Power Systems
ModelPowerDial RS8000E
CategoryPortable Generator
LanguageEnglish

Related product manuals