Do you have a question about the General Dynamics 2.4M SERIES 1241 ANTENNA and is the answer not in the manual?
Step-by-step guide for mounting the AZ/EL positioner onto the mast pipe and securing it.
Explains quadrant labeling and proper placement for standard and inverted reflector configurations.
Covers the assembly of the reflector support structure and its attachment to the positioner.
Details the process of installing the second reflector quadrant onto the support structure.
Instructions for attaching the third reflector quadrant, aligning seam ribs, and securing with hardware.
Provides steps for initial elevation and azimuth alignment using an inclinometer and adjusting hardware.
| Mount Type | Pedestal |
|---|---|
| Antenna Size | 2.4 meters |
| Polarization | Linear |
| Impedance | 50 Ohms |
| Wind Survival | 125 mph (201 km/h) |
| Dimensions | 2.4 meter diameter |
Loading...